Skip to content
English
Contact us
Go to kilncontrol.com
  • There are no suggestions because the search field is empty.

What types of Alarms do TAP Controllers include?

Below are the different Alarms that TAP Controllers automatically generate.

TAP Controllers include alarms for the following conditions: 

  • Max Temperature Exceeded 
  • Failing to Heat for Too Long 
  • Ramp Rate Exceeded 
  • Failure to Cool 
  • High Temp Deviation from Setpoint 
  • Rising Temperature Alarm 
  • No Thermocouple Detected Alarm 
  • Hardware component has Failed

TAP Table of Errors (1) (1)

You can find detailed information about what each of these alarms mean – as well as potential troubleshooting steps in the Troubleshooting section of our FAQ.