Below are instructions for re-connecting your controller to the TAP Kiln Control Mobile app.
If you've connected your controller to the mobile app before and haven’t changed your network name or network password, a simple reboot should do the trick! Otherwise follow the instructions below:
On your controller, navigate to Menu>Settings>Network. Select the Wireless tab, then select your preferred wireless network, and press "connect to network." Enter your password, if applicable. When the controller returns to the Status tab, power off the controller and then power back on. Recheck connection status in the TAP Kiln Control Mobile app.
If the problem persists, please contact SDS Industries for further troubleshooting assistance.